![]() By mastering the art of clew adjustment, sailors can optimize their boat’s performance and maximize their enjoyment on the water. The tack is attached to a fixed point on the boat close to the mast in the case of a mainsail, or a forestay in the case of a headsail. Adjusting the tension on the sheets can change the sails shape and ultimately. Understanding its function and significance in adjusting sail shape and angle is crucial for any sailor. The clew is where the sheets attach to control the sails angle to the wind. As with other sails, the edge of the spinnaker from the tack to the head is the 'luff,' from the clew to the head is the 'leach,' and from the clew to the tack is the 'foot. The tack of the spinnaker is in a fixed position-at the end of the spinnaker pole. The sails need to be eased out fully to be at their most efficient. The clew, located at the lower aft corner of a sail, is an integral part of sail control. Too much bend, or not enough luff curve can cause large creases from the mast to the clew and a lack of control of the leech. The spinnaker is a triangular sail, with a head, tack, and clew. A roach provides extra power to a sail Run A Run, or sometimes just referred to as “Running Downwind”, is a precise point of sail and is when a boat is sailing directly downwind. Battens Long thins strips of usually either fibreglass or wood used to support the sail Clew Bottom aft corner of a sail Foot Bottom edge of a sail Head The top of a sail Leech Aft edge of a sail Luff Front leading edge of a sail Roach Sails are not usually a perfect triangle and include an additional curved area on the leech of a sail, called a roach.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |